Director

Current research assistants

Graduate students

Idisinke Inyang, Naveen Gunja

Undergaduate students

Huy Le, Alyssa Laughter, Osinachi Izuogu, Mohamad Khodr, Dylan Warren

Texas Academy of Mathematics and Science (TAMS) students

Alumni

Graduate students

    Thesis track:
•    Maimouna Doukoure, M.S. in Engineering Technology - Construction Management, Thesis title “Structural Analysis and Finite Element Modeling of Aluminum Honeycomb Sandwich Structures” (May 2021).
•    Mohaned Dewaidi, M.S. in Engineering Technology - Construction Management, Thesis title “Design Method for Cold-Formed Steel Shear Wall Sheathed with Polymer Composite Panel” (July 2020).
•    Noraiz Rao, M.S. in Engineering Technology - Construction Management, Thesis title “Modeling and Analysis of Prototype Shelter Structures on ABAQUS” (May 2020).
•    Alexander Rowen, M.S. in Engineering Technology – Construction Management, Thesis title “Structural, Thermal, and Corrosion Properties of a Cold-Formed Steel Rigid Wall Relocatable Shelter” (May 2020).
•    Babak Yeganehtalab, M.S. in Engineering Technology - Construction Management, Thesis title “Construction Management Method and Techniques in Army Tactical Shelter” (December 2019).
•    Aida Askhanalam, M.S. in Engineering Technology - Construction Management, Thesis title “Design Method of Cold-Formed Steel Frame Shear Wall Sheathed by Structural Concrete Panel” (December 2019).
•    Xun Li, M.S. in Engineering Technology - Construction Management, Thesis title “Cold-Formed Steel Member Connections Using BAC Fasteners” (May 2019).
•    Jeremy Artman, M.S. in Engineering Technology – Construction Management, Thesis title “The Design and Development of Lightweight Composite Wall, Roof, and Floor Panels Rigid Wall Shelters” (May 2018).
•    Zhishan Yang, M.S. in Engineering Technology - Construction Management, Thesis title “Shear Strength of Cold-Formed Steel Clip Angles Subjected to Different Screw Pattern” (December 2017).
•    Nathan Derrick, M.S. in Engineering Technology – Construction Management, Thesis title “Shear and Bending Strength of Cold-Formed Steel Solid Wall Panels using Corrugated Steel Sheets” (December 2017)
•    Xing Lan, M.S. in Engineering Technology - Construction Management, Thesis title “Structural Performance of Novel Cold-formed Steel framed Shear Walls sheathed with Corrugated Sheets” (May 2017).
•    Adam Johnson, M.S. in Engineering Technology - Construction Management, Thesis title “A Study on the System Reliability of Cold-Formed Steel Roof Trusses” (May 2017).
•    Mahsa Mahdavian, M.S. in Engineering Technology - Construction Management, Thesis title “Innovative Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing” (May 2016).
•    Martin Dara, M.S. in Engineering Systems – Mechanical Engineering System, Thesis title “Direct Strength Method for Webcrippling of Cold-Formed Steel Sections under One-Flange Loading” (Summer 2015)
•    Mohamad Yousof, M.S. in Engineering Technology - Construction Management, Thesis title “Analytical Model for Lateral Deflection in Cold-Formed Steel Framed Shear Walls with Steel Sheathing” (December 2014). 
•    Praveen Seelam, M.S. in Engineering Systems- Mechanical Engineering System, Thesis title “Direct Strength Method for Web Crippling of Cold-Formed Steel C Sections” (May 2013).
•    Noritsugu Yanagi, M.S. in Engineering Systems- Construction Management, Thesis title “Analytical Model of Cold-Formed Steel Framed Shear Wall with Steel Sheet and Wood –Based Sheathing” (May 2013).
•    Guowang Yu, M.S. in Engineering Systems- Construction Management, Thesis title “Cold-Formed Steel Framed Shear Wall Sheathed with Corrugated Steel Sheet” (May 2013).
•    Chao Li, M.S. in Engineering Systems – Construction Management, Thesis title “Cold-Formed Steel Shear Wall using OSB Sheathing” (May 2012).
•    Xouphab Panyanouvong, M.S. in Engineering Systems – Construction Management, Thesis title “Bearing Strength of Cold-Formed Steel Bolted Connections without Nut” (May 2012).
•    Yujie Chen, M.S. in Engineering Systems – Mechanical Engineering System, Thesis title “Seismic Detailing for Cold-Formed Steel Shear Walls with Steel Sheathing” (Summer 2010).
•    Ke Xu, M.S. in Engineering Systems – Mechanical Engineering System, Thesis title “Cold-Formed Steel Bolted Connections using Oversized and Slotted Holes without Washers” (Summer 2010).
•    Ibraheem Shreah, M.S. in Engineering Systems – Mechanical Engineering System, Thesis title “Cold-Formed Steel Bolted Connections without Washers on Oversize and Slotted Holes” (May 2009).
•    Hitesh Vora, M.S. in Engineering Technology – Mechanical Engineering Technology, Thesis title “Shear Wall Tests and Finite Element Analysis of Cold-Formed Steel Structural Members” (December 2008).
    

Project track:
•    Kirti Koneru, M.S. in Engineering Technology - Construction Management, Project “Analysis method for thermal performance of cold-formed steel buildings with different insulation technologies” (May 2019).
•    Adnan Sayeed Syed, M.S. in Engineering Technology - Construction Management, Project title “Development BIM Family for CFS Corrugated Shear Walls” (December 2015).
•    Pavan Teja Kondisetti, M.S. in Engineering Technology – Construction Management, Project title “Finite Element Analysis of Cold-Formed Steel Clip Angles in Tension” (December 2015).
•    Justin Coffey, M.S. in Engineering Technology – Construction Management, Project title “Finite Element Analysis of Cold-Formed Steel Clip Angles in Shear” (December 2015).
•    Saikrishna Kondapally, M.S. in Engineering Technology – Mechanical Engineering System, Project title, “Modeling of an Innovative Stirling Engine” (Summer 2015).
•    Raviteja Charungundia, M.S. in Engineering Systems - Construction Management, Project title, “Modeling and Analysis of Traffic at UNT Discovery Park” (Summer 2015).
•    Matthew McCall, MS in Engineering Systems - Construction Management, Project title, “BIM Applications in Residential Buildings” (December 2014).
•    Puja Sapru, MS in Engineering Technology- Construction Management, Project title, “BIM Applications in Clash Detection” (May 2014).
•    Kiam Hai Law, M.S. in Engineering Systems – Mechanical Engineering System, Project title “Cold-Formed Steel Members with Stiffened Perforations” (Fall 2010).
•    Khanh Nguyen, M.S. in Engineering Technology – Mechanical Engineering Technology, Project title “Finite Element Analysis on Cold-Formed Steel Specially Braced Frame” (May 2008).
 

Other paid graduate research assistant:

Omar Kohar (2018-2019)

Undergraduate students

•    Mohamad Khodr, Dylan Warren (2019-2020)

•   Rhett Buoter, Josh Fleming, Aziz Haryani, Omar Kohar, Ha Tran, Dawson Guerrettaz, Sebastian Gatewood, Zachary Canales (2018-2019)
•    Sage Ellis (2017)
•    Nathan Derrick, Roni Ramirez, Jose Sandoval, Nick O'Connor, Christopher Lavezo, Douglas Joseph, Jeremy Artman (2015-2016)
•    Kevin Holden, Tom Kalisky, Emmanuel Salazar, Adam Johnson (2013 – 2015)
•    Marcus Sanchez, Roger Rovira (2010 – 2012)
•    Kyle Durham, Devin Hyde, Travis Stivors, Taylor Cheney, Andy Hetrick (2009)
•    George Trabazo, Robert Moore, Jole Bolz (2007 – 2008)
•    Cole Earle, Jimmy Tucker (2005 – 2007)
•    Tony Dianard (2005 – 2006)
•    Trevor Lokie, Andrew Alnoso (2005)

Texas Academy of Mathematics and Science (TAMS) students

•    Harish Sridharan, Wakdikar Som (2020-2021)

•    Tobias Haynes, Rasna Baweja (2017-2018)

•    Maxine Tao (2016)

•    Haein Kim, Josh Lee (2012)

•    Wesley Beckner, Alex Wu (2009)

•    Stepen Mathai, Szu-Chun Huang (2008)